3pt Standard Harrow

The Wingfield 3 point Standard chain harrow is available in 8' 0" - 10' 4" widths and utilizes a fully-encompassing, box-tube frame to offer total control over the harrow. With the three point frame, you can back into corners, shake out loose material, control the number/pressure of the tines on the ground, and easily transport the harrow. You can quickly change the harrow aggressiveness with no tools. Plus, the unit is quick-hitch enabled as standard equipment.

The 3 point Standard is a tremendous tool for landscapers to prepare the ground for seeding, work in seed, incorporate fertilizer, thatch, aerate, and level a yard. This unit is so popular with landscapers because it can quickly change tine aggressiveness, break down to fit in the bed of a pickup with no tools, and can be picked up for easy transport and backing into corners. With the 5' length, you are able to get around through tight spaces and around trees easily, but still have a unit that can do the job of a larger piece of equipment. This landscape drag is able to be pulled by either a Cat #1 or #2 tractor, and is quick-hitch ready. A landscaper needs a tool that can do many jobs on the site and is built to last. With the Wingfield American 3 point Standard chain harrow, you have a unit that achieves that and more!

Of course, the Wingfield Standard can also be used to: thatch and aerate a pasture, break up manure, create a food plot, groom a riding arena, drag a beach, level off construction areas, and much more!

You won't find a better 3pt chain harrow for sale on the market today because of these features:

A drawn high-carbon, spring-steel harrow tine that can outlast the competition by up to three times!
Harrow tines are computer bent to ensure even wear and consistent performance
Rings in lieu of hooks to prevent unhooking, binding, and premature wear
Box tube framework is fully encompassing and built to handle rough conditions
The 3pt Lift is setup as either a Cat #1 or #2 and is quick-hitch enabled
Harrow can be pulled in the aggressive mode (tines standing up), less aggressive mode (tines laying flat), upside down (tines pointing in the air), or a combination between the front and rear section - rough up in aggressive mode with the front section, and smooth out with the rear section either in the less aggressive mode or upside down
The harrow mat attaches to the frame with 4 chains -this allows the operator the ability to quickly switch from the aggressive to less aggressive modes. Just release the chains, leave the harrow mat on the ground, drive your tractor with frame around to the other end, re-attach the chains, and drive off in the other direction
Entire unit can be broken down into 3 pieces with no tools required, and can also fit in the bed of a pickup truck
Made in USA

The Wingfield 3 point Standard chain harrow is an ideal tool behind a small tractor. The 3 point framework gives the operator full control in using and transporting the harrow. No matter if you are grooming a gravel lot or incorporating fertilizer, the Wingfield 3 point Standard can fulfill your harrowing needs.

Remember: You control the harrow on a frame, a drag harrow controls you.

Specifications:

Width: 8' 0" - 10' 4"
Length/Depth: 5' 0"
Weight: 386 lbs. - 458 lbs.
Frame Beams: 2 1/2" x 2 1/2" x 3/16" x 72" or 96" front beam, 2 1/2" x 2 1/2" x 1/8" x 72" or 96" rear beam
Frame Verticals: 1” x 2” x 1/8” x 60” Vertical support beam
Hitch: Cat #1 and Cat #2, quick-hitch ready
Drawbar: 86" - 115" wide - 1 1/4" Schedule 80 drawbar pipe (front and rear)
Optional Chain/Clevis: 8' long - 5/0 high-test chain, clevis accepts a 1/2" pin
Tine: Computer bent 1/2" diameter high-carbon, drawn spring steel tine
Number of tines: 78 - 100
Points of contact: 156 - 200